HERMAcoat opaque (244)/62D/523
HERMAcoat opaque (244)
White label paper, semi-gloss coated on one side with an opaque reverse side coating for higher opacity, FSC® Mix Credit
Adhesive 62D
Permanent, acrylic based adhesive
HERMA PH (523)
Honey, supercalendered glassine
Service Information
| Useable width | Net width | Minimum quantity in m2 | Stock goods | Provisioning Time |
|---|---|---|---|---|
| 2,000 mm |
|
16,000 m² |
|
Coating, about 2 weeks |
Self-adhesive Material
HERMAcoat opaque (244)/62D/523
| Grammage | approx. 163 g/m² | ISO 536 |
| Total caliper | approx. 138 µm | ISO 534 |
| Service temperature | -30 to 80 °C |
The semi-gloss coated surface of HERMAcoat opaque offers an excellent print quality in all conventional printing methods as well as in thermal transfer printing. Due to its total opacity the label material obscures the labelled surface completely.
The pulp for this paper comes from FSC® certified forest management and other controlled sources.
Adhesive 62D is a universally applicable permanent adhesive. It has a wide range of applications including high-quality industrial labels. It is suited for labelling rough but not extremely curved surfaces and is highly resistant to light, heat and ageing. The supercalendered glassine is perfectly suited for assignment in labelling machines equipped with optical or mechanical scanners.Storing at a temperature of 20 ± 5 °C, a relative humidity of 45 ± 5 % and a dark storage is recommended. Moisture, heat and direct sunlight have to be avoided.
The shelf life is four years from date of production.
All ingredients of adhesive 62D comply with recommendation BfR XIV or FDA 21 CFR 175.105 (Adhesives).
The pressure-sensitive adhesive 62D can be safely used for the back coating of labels for the labelling of foodstuffs for storage at room temperature and below. It may be used in direct contact with dry, moist and fatty foodstuffs that can be assigned a correction factor of at least 4 in accordance with Regulation (EU) No. 10/2011. Furthermore, the adhesive may be used for laminating various materials. In this case, cut edge contact with food is harmless as far as the above mentioned adhesive is concerned. It must be ensured that the relevant migration limits are complied with by the laminated packaging (Declaration of no objection valid until 17.04.2027).
Furthermore the self-adhesive labels with the adhesive 62D can be used for labelling of blood bags (Expert's Opinion from April 15, 2021).
The paper complies with recommendation BfR XXXVI.Label material
HERMAcoat opaque (244)
White label paper, semi-gloss coated on one side with an opaque reverse side coating for higher opacity, FSC® Mix Credit
| Grammage | approx. 90 g/m² | ISO 536 |
| Caliper | approx. 75 µm | ISO 534 |
| Tensile strength (MD) | approx. 75 N/15 mm | DIN 53112 |
| Tensile strength (CD) | approx. 36 N/15 mm | DIN 53112 |
| Stiffness (MD) | approx. 210 mN | DIN 53121 |
| Stiffness (CD) | approx. 100 mN | DIN 53121 |
| Surface gloss 60° GU | approx. 15 GU | ISO 2813 |
| Opacity | approx. 99.7 % | ISO 2471 |
Adhesives
Adhesive 62D
Permanent, acrylic based adhesive
| Tack | high | |
| Peel adhesion | very high | |
| Shear | high |
Release liner
HERMA PH (523)
Honey, supercalendered glassine
| Grammage | approx. 54 g/m² | ISO 536 |
| Caliper | approx. 47 µm | ISO 534 |
| Tensile strength (MD) | approx. 66 N/15 mm | DIN 53112 |
| Tensile strength (CD) | approx. 32 N/15 mm | DIN 53112 |
| Transparency | approx. 52 % | DIN 53147 |
All statements, technical information and recommendations regarding HERMA products are given in good faith and are based on tests that we believe to be reliable, but do not constitute a guarantee or warranty. We give no guarantee as to the suitability of the product for a specific application, this should be tested by the user. Unless otherwise agreed in writing, we only accept liability within the scope of our General Terms and Conditions of Delivery and Payment.
HERMA GmbH, Adhesive Material Division, 70791 Filderstadt, Phone +49 (0) 711 7702-0
